GENERATOR POWER MANAGEMENT (While Charging)
Generator Load Control – Using the PSP SAK-60
When installing an EV charger in a home with an automatic standby generator, the additional load of the charger can easily exceed the capacity of the generator. This can cause the generator circuit breaker to trip, leaving the house without primary utility or backup power. To prevent this, we install a generator load control incorporated into the EV charger circuit. This control monitors the load on the generator and will disconnect the charging circuit if it exceeds the capacity of the generator. The control we generally use is a PSP SAK-60 Smart Management Module. This system will monitor the load on the generator and prevent the EV charger from operating if the generator cannot handle this additional load.
